The Elzetta ZFL-M60 features all metal construction with a main body of Mil-Spec Type III Hard Anodized 6061-T6 Aluminum. Every Elzetta ZFL-M60 model has a body diameter of 0.99" (1-inch nominal). 2-Cell models with batteries weigh 5.3 oz (150 g) and measure 4.7" to 4.9" (120 mm to 125 mm) in length. The ZFL-M60 has been designed to optimize electrical and thermal conduction with the M60 LED module.
The grease enhances this conduction while inhibiting corrosion. Unlike other lights, the ZFL-M60 does not have exposed electrical components or an open LED emitter which must be protected behind a cover lens. Sensitive components on the ZFL-M60 are contained within the Malkoff M60 LED module. When the bezel, with its O-ring in place, is properly installed, a weather-tight seal is formed between the O-ring and the acrylic lens of the M60 LED module. This design eliminates the need for a separate cover lens allowing unimpeded light emission.
Momentary activation is achieved by pressing the pushbutton lightly. Constant On is achieved by pressing the pushbutton firmly until it 'Clicks' (pressing firmly again will Click the Light off). High Output (235 Lumens) occurs when the Tailcap is rotated fully Clockwise (screwed all the way on). Low Output (~15 Lumens) occurs when the Tailcap is rotated Counter-Clockwise (unscrewed) anywhere from 1/8 to 1/2 rotation from the High position.
Each complete ZFL-M60 Tactical Light comes with a fresh set of USA-Made 123A lithium batteries. 2-Cell models produce 235 lumens of light for 1.5 hours and then continue to produce useful light for approximately 6.5 hours. 2-Cell Models may be operated on RCR123 batteries.
All Elzetta products, including the ZFL-M60, are designed, engineered, and manufactured in the USA using American tooling and American made materials.
